Dentrix Patient Imaging Freezes After Windows Update
Summary
This guide helps you troubleshoot and resolve: Dentrix Patient Imaging Freezes After Windows Update. Follow the steps below to fix the issue.
Common Causes
Dentrix patient imaging workstations may freeze or crash during panoramic X-ray loading following a Windows feature update or GPU driver change. This guide helps verify graphics driver compatibility, adjust hardware acceleration within Dentrix imaging modules, and perform a clean driver rollback without affecting patient record access.
Quick Fix Steps
- Restart the imaging workstation and test panoramic X-ray loading.
- Check for pending Windows updates and install any critical patches.
- Verify that the Dentrix imaging module is running in compatibility mode for Windows 10 or Windows 11 as appropriate.
- Disable hardware acceleration temporarily within Dentrix to determine if the GPU driver is causing the freeze.
- Roll back the graphics driver to the previous version if the issue began immediately after a driver update.
Detailed Instructions
Verify Windows Update Status
- Select Start, then select Settings.
- Navigate to Windows Update.
- Select Check for updates.
- Install any available updates and restart the workstation if prompted.
- Test panoramic X-ray loading in Dentrix patient imaging.
Disable Hardware Acceleration in Dentrix Imaging
The menu path differs depending on whether you are using Dentrix G7 (on-premise) or Dentrix Ascend (cloud-based).
Dentrix G7 (On-Premise)
- Open Dentrix and navigate to the patient imaging module.
- Select Setup from the main menu.
- Choose Image Acquisition Settings.
- Locate the Hardware Acceleration option.
- Clear the checkbox to disable hardware acceleration.
- Select OK to save changes.
- Restart Dentrix and test panoramic X-ray loading.
Dentrix Ascend (Cloud)
- Log in to Dentrix Ascend through your web browser.
- Navigate to Imaging in the left-hand navigation panel.
- Select Settings or Preferences.
- Locate the Hardware Acceleration or GPU Rendering toggle.
- Switch the setting to Off.
- Refresh the browser and test image loading.
Create a System Restore Point Before Driver Changes
- Select Start and type Create a restore point.
- Select the matching result to open System Properties.
- On the System Protection tab, select Create.
- Enter a descriptive name such as
Before Dentrix GPU Driver Change. - Select Create and wait for the confirmation message.
- Select Close.
Roll Back the Graphics Driver
- Right-click Start and select Device Manager.
- Expand Display adapters.
- Right-click the graphics adapter (for example,
NVIDIA GeForce,AMD Radeon, orIntel HD Graphics) and select Properties. - Select the Driver tab.
- Select Roll Back Driver. If the button is greyed out, no previous driver version is stored.
- Choose a reason for the rollback and select Yes to confirm.
- Restart the workstation when prompted.
- Test Dentrix patient imaging, specifically panoramic X-ray loading.
Update to the Latest Compatible Graphics Driver
- Identify the graphics card model in Device Manager under Display adapters.
- Visit the manufacturer's website (NVIDIA, AMD, or Intel) and download the latest driver for that model.
- Select Custom installation during setup and choose Perform a clean installation.
- Restart the workstation after installation.
- Re-enable hardware acceleration in Dentrix imaging preferences if the freeze no longer occurs.
Set Windows Compatibility Mode for Dentrix Executable
- Close Dentrix completely.
- Navigate to the Dentrix installation folder, typically
C:\Program Files\Dentrix. - Right-click the Dentrix executable (for example,
Dentrix.exe) and select Properties. - Select the Compatibility tab.
- Select Run this program in compatibility mode for.
- Choose Windows 10 or Windows 11 from the dropdown menu.
- Select Apply, then select OK.
- Launch Dentrix and test panoramic X-ray loading.
Troubleshooting
Freeze Persists After Driver Rollback
- Confirm that the workstation meets Dentrix minimum hardware requirements for the current version.
- Check
Event Viewerunder Windows Logs > Application for Dentrix-related errors around the time of the freeze. - Test with a different monitor or display cable to rule out GPU output issues.
- Temporarily disable third-party antivirus or endpoint protection to determine if it is blocking imaging processes.
- Check Dentrix release notes for known Windows update compatibility issues.
Panoramic X-ray Images Fail to Load Completely
- Verify network connectivity between the imaging workstation and the Dentrix server.
- Ensure the
C:\Program Files\Dentrixdirectory and imaging subfolders have the correct permissions for the clinic user account. - Clear the Dentrix imaging cache if the software provides a Clear Cache or Purge Temporary Images option.
Dentrix Ascend Web Imaging Considerations
- Dentrix Ascend imaging runs through the browser rather than a local workstation application.
- Ensure the browser is updated to the latest version.
- Clear the browser cache and temporary internet files.
- Disable browser hardware acceleration if freezing occurs during image loading.
- Verify that the clinic has a stable internet connection for cloud imaging access.
If the issue continues after completing these steps, escalate to Dentrix support or Henry Schein support for further assistance. You can also Open a Ticket with our service desk.
Still Having Issues?
💻 Open a Ticket