Fix Dentrix Patient Imaging Freezing When Loading Panoramic X-rays
Summary
This guide helps you troubleshoot and resolve: Fix Dentrix Patient Imaging Freezing When Loading Panoramic X-rays. Follow the steps below to fix the issue.
Quick Tip: Need immediate assistance? 💻 Open a Ticket
Common Causes
Dentrix Patient Imaging may hang or freeze when opening panoramic or periapical X-ray images due to corrupted local cache, missing imaging bridge services, insufficient workstation disk space, or mismatched hardware acceleration settings between the imaging workstation and your practice server. Follow the steps below to resolve the issue and restore normal imaging performance.
Quick Fix Steps
- Restart the Dentrix Patient Imaging workstation and try opening the image again.
- Confirm the imaging workstation has at least 5 GB of free disk space on the system drive.
- Verify that the AGDSCal service and Dentrix Imaging Bridge service are running.
- Clear the local patient image cache and reopen Dentrix Patient Imaging.
- Check DirectX and hardware acceleration settings against your practice server specification.
Detailed Instructions
1. Check free disk space on the imaging workstation
- Open File Explorer.
- Select This PC from the left navigation pane.
- Locate the system drive, usually
C:, and confirm there is at least 5 GB of free space. - If space is low, delete unnecessary temporary files or move large non-clinical files to an external drive or network share.
Dentrix Patient Imaging requires adequate local disk space to cache panoramic and periapical radiographs during loading. Insufficient space can cause the application to freeze while rendering large image files.
2. Verify AGDSCal and imaging bridge services
- Press
Windows Key + Rto open the Run dialog. - Type
services.mscand pressEnter. - In the Services console, locate AGDSCal and confirm its status is Running.
- Locate the Dentrix Imaging Bridge service (often listed as Dentrix Imaging Service or similar) and confirm it is Running.
- If either service is stopped, right-click it and select Start. If it fails to start, set the Startup type to Automatic and restart the workstation.
3. Clear the corrupted patient image cache
- Close Dentrix Patient Imaging completely.
- Press
Windows Key + R, type%localappdata%, and pressEnter. - Open the Dentrix folder, then navigate to the
Patient ImagingorCachesubfolder. - Select the cached image files for the affected patient and delete them.
- Restart Dentrix Patient Imaging and attempt to open the panoramic or periapical X-ray again.
Do not delete files directly from the Dentrix database folder or the practice server image repository. Only clear local cache files on the affected workstation.
4. Confirm DirectX and hardware acceleration settings
- Press
Windows Key + R, typedxdiag, and pressEnter. - In the DirectX Diagnostic Tool, note the DirectX version listed under System Information.
- Compare this version with the specification documented for your practice server or imaging workstation build.
- Right-click the desktop and select Display settings, then select Graphics or Graphics settings.
- Ensure hardware-accelerated GPU scheduling is enabled if required by your practice specification.
- For application-specific settings, select Browse to add Dentrix Patient Imaging and set the graphics preference to High performance.
- Restart the workstation and reopen Dentrix Patient Imaging.
Troubleshooting
Issue: Freeze persists after clearing cache
- Confirm the affected panoramic X-ray opens on a different imaging workstation. If it opens elsewhere, the issue is isolated to the original workstation.
- Update the graphics driver on the freezing workstation to the latest version compatible with your Dentrix build.
- Verify network connectivity between the workstation and the practice server where images are stored.
- Ensure the workstation can ping the practice server IP address and access shared imaging folders.
Issue: AGDSCal service will not start
- Check the Windows Event Viewer under Windows Logs > Application for errors related to AGDSCal.
- Ensure the Dentrix database service is running before attempting to start AGDSCal.
- Reinstall the Dentrix imaging components if the service files are missing or corrupted.
Issue: Multiple workstations affected
- If several workstations freeze when opening the same image, the source radiograph file on the practice server may be corrupted.
- Restore the affected panoramic or periapical X-ray from your most recent backup.
- Open a Ticket if server-side image corruption is suspected.
Still Having Issues?
Need more help? If the issue persists after trying these steps, please open a support ticket and our team will assist you.
💻 Open a Ticket
💻 Open a Ticket