Fix Secure Connection Failed in NXTsoft Parts Ordering After Firewall Reset
Summary
This guide helps you troubleshoot and resolve: Fix Secure Connection Failed in NXTsoft Parts Ordering After Firewall Reset. Follow the steps below to fix the issue.
Common Causes
After a Windows Firewall reset or a change to your network security policy, NXTsoft parts ordering software may fail to establish a secure connection. This prevents your automotive workshop from accessing supplier catalogues and processing orders. This guide will help you restore the required firewall rules and port access so your parts portal returns to normal operation.
Quick Fix Steps
- Restart your computer to clear temporary network conflicts.
- Confirm that your internet connection is active by opening a website in your browser.
- Check that the NXTsoft application is not being blocked by Windows Firewall.
- Verify that the required ports are open for outbound traffic.
- Restart the NXTsoft parts ordering software and test the connection.
Detailed Instructions
Check Windows Firewall Settings
- Select the Start button and type
Windows Security. - Open Windows Security from the search results.
- Select Firewall & network protection.
- Choose Allow an app through firewall.
- Select Change settings. You may need administrator approval.
- Look for NXTsoft or your parts ordering application in the list.
- Ensure both Private and Public checkboxes are selected for the application.
- If the application is missing, select Allow another app, browse to the NXTsoft installation folder, and add it.
- Select OK to save your changes.
Verify Required Ports Are Open
- Select the Start button, type
PowerShell, right-click Windows PowerShell, and select Run as administrator. - Type the following command to check outbound connectivity on port 443 (standard secure web traffic):
test-netconnection -computername parts.nxtsoft.com -port 443- If
TcpTestSucceededshowsFalse, the port is being blocked by your firewall or router. - Return to Windows Security > Firewall & network protection > Advanced settings.
- Select Outbound Rules in the left pane.
- Select New Rule from the Actions pane on the right.
- Choose Port and select Next.
- Select TCP, enter
443in the specific local ports field, and select Next. - Choose Allow the connection and select Next.
- Ensure Domain, Private, and Public are all checked, then select Next.
- Give the rule a name such as
NXTsoft Parts Portal HTTPSand select Finish.
If your workshop uses a hardware firewall or router provided by your internet service provider, you may also need to log into that device and confirm outbound HTTPS traffic is not being restricted.
Troubleshooting
Connection Still Fails After Firewall Changes
- Restart your modem and router, then wait two minutes before testing again.
- Ensure your computer's date and time are set correctly, as incorrect settings can cause secure connection failures.
- Temporarily disable any third-party antivirus or internet security software to see if it is interfering with the secure connection.
- Clear your browser cache and restart the parts ordering application.
- Check with your IT administrator to ensure no group policy is overriding your local firewall rules.
Application Crashes or Freezes
- Ensure your version of NXTsoft parts ordering software is up to date.
- Confirm your Windows operating system has all current updates installed.
- Verify that your computer meets the minimum system requirements for the software.
Do not disable Windows Firewall permanently. Leaving your network exposed increases the risk of malware and unauthorised access to your workshop systems.
If you have followed these steps and the secure connection failure continues, Open a Ticket and our support team will investigate further.
Still Having Issues?
💻 Open a Ticket