Home › Knowledgebase › KB-1559

How To Fix Dymo Label Writer Too Many Labels Error

Summary

This guide helps you troubleshoot and resolve: How To Fix Dymo Label Writer Too Many Labels Error. Follow the steps below to fix the issue.

Quick Tip: Need immediate assistance? 💻 Open a Ticket

Common Causes

When kitchen staff encounter a "too many labels" or "buffer full" error on a Dymo label printer, order ticket printing can stop entirely. This typically happens after printing multiple order tickets or kitchen dockets in quick succession, causing the printer's internal memory buffer to overflow. This guide provides steps to clear the print queue and power-cycle the device to restore normal operation. These steps apply to common Dymo LabelWriter models, including the 450 and 550 series, though menu names may vary slightly between wired and wireless versions.

Quick Fix Steps

Follow these steps to quickly clear the error and get back to printing kitchen tickets.

  1. Cancel all pending print jobs on the computer connected to the printer.
  2. Turn off the Dymo label printer using the power switch.
  3. Disconnect the power cable from the wall outlet or the back of the printer.
  4. Wait at least 30 seconds to allow the internal buffer to fully clear.
  5. Reconnect the power cable and turn the printer back on.
  6. Print a test label to confirm the error is resolved.

Detailed Instructions

Clearing the Print Queue on Windows

If labels are stuck in the Windows print spooler, they can continue to send data to the printer even after the error appears.

  1. Press Windows Key + R on your keyboard.
  2. Type control printers and press Enter.
  3. Right-click your Dymo label printer and select See what's printing.
  4. In the print queue window, click the Printer menu in the top toolbar.
  5. Select Cancel All Documents.
  6. Confirm the action when prompted.

Clearing the Print Queue on macOS

Mac users can clear stuck jobs through the system settings menu. The path differs slightly depending on your macOS version.

  1. Click the Apple menu in the top-left corner of the screen.
  2. On macOS Ventura or later, select System Settings. On earlier versions of macOS, select System Preferences.
  3. Navigate to Printers & Scanners in the sidebar.
  4. Select your Dymo printer from the list.
  5. Click Open Print Queue.
  6. Select any pending jobs and click the Delete (X) button to remove them.

Power-Cycling the Dymo Printer

Power-cycling resets the printer's internal hardware and clears the buffer memory.

  1. Locate the power switch on the Dymo label printer and switch it to Off.
  2. Unplug the power cable from the electrical outlet.
  3. Wait a full 30 seconds. This ensures all residual power is drained from the internal buffer.
  4. Plug the power cable back into the outlet.
  5. Switch the printer back to On.
  6. Wait for the status lights to stabilise before attempting to print again.

Troubleshooting

Checking Label Roll Alignment and Sensor

A misaligned label roll or a dirty sensor can trigger buffer or label errors on Dymo printers.

Verifying Label Size Settings in the Driver

Incorrect label size settings in the print driver can cause the printer to expect labels of a different length, leading to buffer errors.

Error Returns Immediately After Printing

If the "buffer full" message reappears as soon as you print a new ticket, the issue may be related to the print driver or the application sending the jobs.

Printer Not Responding After Power Cycle

If the printer does not turn on or is not detected by the computer after the reset:

Tip: In high-volume environments, avoid sending large batches of labels all at once. Printing tickets in smaller groups can help prevent the buffer from filling up during peak periods.
Caution: Do not attempt to open the internal casing of the Dymo printer to clear a jam, as this may void the manufacturer's warranty. If a physical label jam is suspected, open a ticket for assistance.

If the error persists after following these steps, Open a Ticket for further assistance.

Still Having Issues?

Need more help? If the issue persists after trying these steps, please open a support ticket and our team will assist you.

💻 Open a Ticket