How To Reset Remote Access PIN For Site Tablets
Summary
This guide helps you troubleshoot and resolve: How To Reset Remote Access PIN For Site Tablets. Follow the steps below to fix the issue.
Common Causes
Reset Remote Access PIN for Site Tablets
This guide explains how to reset or change remote access PINs and passwords for site tablets running RustDesk. It is designed for field trades staff using vehicle-mounted tablets on construction sites. Use these steps to update an existing unattended access password, generate a new session PIN for attended access, or recover access if the current credentials are forgotten.
Reset or Change the Unattended Access Password
Unattended access allows your IT support team to connect to a tablet without someone being physically present to approve the session. If you need to change an existing static password on a vehicle-mounted tablet, follow these steps:
- Launch RustDesk on the site tablet.
- Click the Settings gear icon in the top-right corner of the application window.
- Select Security from the left-hand sidebar menu.
- Locate the Unattended access section.
- Clear the existing value in the Password field.
- Enter a new strong password.
- Enter the same password again in the Confirm password field.
- Click Apply or Save to store the new credentials.
- Ensure the Allow unattended access toggle is switched to On.
Disable and Re-Enable Unattended Access as a Reset Method
If the current unattended access password is unknown or will not save, you can reset the configuration by disabling unattended access entirely and then re-enabling it with a new password:
- Open RustDesk on the tablet.
- Navigate to Settings > Security.
- In the Unattended access section, switch the Allow unattended access toggle to Off.
- Click Apply or Save. This clears the stored unattended password.
- Switch the Allow unattended access toggle back to On.
- Enter a new password in the Password and Confirm password fields.
- Click Apply or Save to finalise the reset.
Generate a New Session PIN for Attended Access
Attended access requires a person at the tablet to provide a temporary session PIN. This PIN is generated automatically and changes with every new session. To obtain a new session PIN:
- Open RustDesk on the tablet.
- View the main interface where the device ID and Password are displayed.
- If you need a fresh password, restart the RustDesk application or request a new session from the technician's console.
- Provide the current session ID and Password to your support technician via phone or SMS.
- When the technician attempts to connect, a prompt appears on the tablet asking to allow the remote connection.
- Tap Accept on the tablet to grant access for that session only.
If the Current PIN or Password Is Forgotten
If the unattended access password has been forgotten or is unknown, and you cannot access the Security settings to change it:
- Attempt to disable unattended access by navigating to Settings > Security and switching Allow unattended access to Off. You may be prompted for the current password.
- If you cannot authenticate because the password is unknown, restart the tablet and open RustDesk.
- Use the session-specific ID and Password displayed on the main screen for attended access, provided someone is physically present at the tablet to tap Accept.
- If neither unattended nor attended access is available, you will need physical access to the tablet to reinstall RustDesk or contact your internal administrator.
Security Warnings for Vehicle-Mounted Tablets
Site tablets in trades and construction environments are often left in vehicles or unattended at job sites. Static unattended passwords create a security risk if the device is lost or stolen:
- Never use the tablet's serial number, simple sequences such as "123456", or easily guessable words as the unattended password.
- Change the unattended access password immediately if a tablet is misplaced, stolen, or assigned to a new staff member.
- Ensure the tablet itself is protected by a device lock screen or PIN in addition to the RustDesk password.
- Review which tablets have unattended access enabled on a regular basis and disable it for devices that no longer require remote support.
Troubleshooting Reset Issues
New Password Not Saving
- Ensure you clicked Apply or Save after entering the new password in both the Password and Confirm password fields.
- Verify that the Allow unattended access toggle is switched to On before saving.
- Check that the tablet has an active internet connection via Wi-Fi or mobile data so the change can synchronise with the RustDesk relay server.
- Restart RustDesk and confirm the new password is still present in the Security settings.
Access Denied After Password Reset
- Confirm you are entering the newly set unattended password, not a previous session PIN.
- Ensure the technician is using the correct device ID shown on the tablet.
- If unattended access was disabled and re-enabled, verify the toggle is set to On and that a new password was saved.
- If the tablet is in an area with poor mobile reception, move to a location with better signal and retry the connection.
Unable to Access Security Settings
- If you are prompted for a password to open Security settings and do not know it, use the session-specific ID and Password on the main screen for attended access instead.
- If no one is present at the tablet to approve an attended session, arrange physical access to the device.
- If the tablet is lost or stolen, Open a Ticket immediately so the device can be flagged and remote access credentials can be revoked.
Still Having Issues?
💻 Open a Ticket