How To Pair A Bluetooth Barcode Scanner With A Pos Terminal
Summary
This guide helps you troubleshoot and resolve: How To Pair A Bluetooth Barcode Scanner With A Pos Terminal. Follow the steps below to fix the issue.
Common Causes
Bluetooth barcode scanners allow automotive workshops to quickly scan vehicle identification numbers, parts codes, and customer invoices directly into their point of sale (POS) terminal. Pairing a Bluetooth scanner with a Windows-based POS terminal is usually straightforward, but connection failures can occur if the scanner is not in pairing mode, Bluetooth is disabled, or the device is already paired to another computer.
Quick Fix Steps
- Restart your POS terminal and the barcode scanner.
- Check that Bluetooth is enabled on the POS terminal.
- Put the barcode scanner into pairing mode according to the manufacturer's instructions.
- Scan for devices and select your scanner from the list.
Detailed Instructions
Step 1: Enable Bluetooth on the POS Terminal
- Select the Start button, then select Settings.
- Select Bluetooth & devices from the left-hand menu.
- Ensure the Bluetooth toggle is switched to On.
Step 2: Put the Barcode Scanner into Pairing Mode
Refer to your scanner's user manual for the exact pairing procedure. Most Bluetooth barcode scanners require you to press and hold a specific button or scan a pairing barcode printed in the manual. The scanner will typically flash an LED light to indicate it is discoverable.
If you do not have the manual, check the underside of the scanner for a model number and search the manufacturer's website for pairing instructions.
Step 3: Pair the Scanner with Windows
- On the POS terminal, go to Settings > Bluetooth & devices.
- Select Add device, then choose Bluetooth.
- Wait for Windows to search for nearby devices.
- Select your barcode scanner from the list of discovered devices.
- If prompted, enter the pairing code (often
0000or1234, unless your manual specifies otherwise). - Select Connect and wait for the status to change to Connected.
Step 4: Verify the Scanner Input
- Open a text editor such as Notepad or your workshop management software.
- Place the cursor in an empty field.
- Scan a barcode.
- Confirm the scanned data appears correctly and that a carriage return (Enter key) is sent if required by your software.
Some scanners send an Enter keypress automatically after each scan. If your POS software does not advance to the next field, check the scanner settings to enable or disable the suffix character.
Troubleshooting
Scanner Does Not Appear in the Bluetooth List
- Ensure the scanner is in pairing mode and within one metre of the POS terminal.
- Turn Bluetooth off and back on again on the POS terminal.
- Restart the barcode scanner.
- Check that the scanner is not already paired to another device, such as a tablet or mobile phone. Disconnect it from that device first.
Scanner Connects but Does Not Input Data
- Open Settings > Bluetooth & devices and confirm the scanner shows as Connected, not just Paired.
- Remove the device and pair it again from scratch.
- Test the scanner in Notepad to determine whether the issue is with the hardware or your workshop management software.
- Check the scanner battery level. Low power can cause intermittent input failures.
Scanner Disconnects Frequently
- Move the POS terminal and scanner away from other wireless devices that may cause interference, such as Wi-Fi routers and microwaves.
- Ensure there are no large metal objects between the scanner and the terminal.
- Update the Bluetooth driver on the POS terminal via Device Manager.
Do not attempt to pair the scanner while a customer transaction is in progress. Pairing can temporarily interrupt other Bluetooth devices connected to the POS terminal.
If you have followed these steps and the barcode scanner still will not pair or input data correctly, Open a Ticket and our support team will assist you.
If you host with us, you don't need to do this yourself — just Open a Ticket and our Brisbane team will get it sorted.
Still Having Issues?
💻 Open a Ticket